Best Line Tooling Sdn Bhd
15A, Jalan NB2 1/1,
Taman Nusa Bestari 2,
81300 Skudai,
Johor, Malaysia.
15A, Jalan NB2 1/1,
Taman Nusa Bestari 2,
81300 Skudai,
Johor, Malaysia.
+607-5589849
+6014-9882372 (Ms.Zixuan)
+6014-9882372 (Ms.Zixuan)
+607-5549849
A780 and A790 radial type heads
| Previous | 4 / 8 | Next |
The radial type of fine boring heads consist of two ranges:
- A780, a range of 9 pre-balanced, fine boring heads covering a diameter range of 15 - 205mm (.59 to .72 inches).
- A790, a range of 5 balanced fine boring heads designed for high speed machining in the 30 - 115 diameter range.
The main benefits of the A780 and A790 radial type heads are:
- Precision
- Micrometric adjustment within 2.5 µm on the diameter
- Micrometric diameter setting protected by the insert holder and head contact
- Hole diameter precision IT5 is possible to achieve - Productivity
- Cutting speeds up to 1500 m/min with balanceable heads
- Coolant through the head towards the insert - User friendly
- A790 balancing rings with direct setting - no balancing charts needed
- Insert holders for chamfering and back boring - Cost effective
- For low to average machine speeds, pre-balanced heads are ideal
- All heads use only three insert holder sizes - Long tool life
- All A780 and A790 type heads are dust proof and greased for life - no re-greasing maintenance is required. - Flexibility
- Large range of insert grades for all materials