Best Line Tooling Sdn Bhd
15A, Jalan NB2 1/1,
Taman Nusa Bestari 2,
81300 Skudai,
Johor, Malaysia.
+6014-9882372 (Ms.Zixuan)

Axiabore Fine Boring Heads

Previous 8 / 8 Next

Axiabore Fine Boring Heads Boring Holemaking

Fine boring heads with axially fitted tools Ø 0,3 - 108 mm (inches: 0.12 to 4.25)

The Axiabore® range consists of 5 fine boring heads using axial tools:

  • Nanobore®, a precision fine boring head for extremely small diameters, 0,3 - 8 mm (0.012-0.315 inches) 
  • Axiabore®, a precision fine boring head for the 2 - 20 mm diameter range (0.078 to 0.78 inches)
  • Axiabore® Plus, a precision head covering a larger diameter range, 6 - 108 mm (0.236 to 4.25 inches), and designed for high precision boring, OD-overturning and grooving
  • Axialibrabore™, a balanceable head for high speed machining, 2 - 20 mm diameter (0.078 to 0.78 inches)
  • Axialibrabore™ Plus, a balanced head for high speed machining for larger diameters, 6 - 33 mm (0.236 to 1.3 inches)

We can offer you...


  • Micrometric adjusting (2,5µm on the diameter; 0.0001 inches): hole diameter precision up to IT5 achievable.
  • Rigid tools for full control of the hole geometry and surface finish (Ra 0.6 achievable).


  • ¡®Cylinder & flange¡¯ tool fixing design for a superior tool rigidity: higher speeds (e.g. up to Vc 500 m/min=4640 sf/min in steel), higher productivity, higher precision and better surface finish. 
  • Fine balanced heads allow higher speeds, improve the hole geometry and reduce the machine spindle stress.

Cost effective 

  • Boring capacities from 0,3 to 108 mm (0.012 to 4.25 inches), with 3 head sizes only. 
  • Modular boring bars composed of a shank and interchangeable insert holder, for wide capacities. 
  • Heads are made from oxidation resistant steel, are lubricated and sealed.


  • Boring, grooving and OD-overturning with the multi-purpose adapter (MPA) used with the Axiabore Plus head.

User friendly

  • ¡®LibraOne¡¯ system with one balancing ring only, with direct ring reading, no chart needed. 
  • IBL ¡®indirect barrel locking¡¯ system: the set diameter is not influenced by the locking screw. 
  • Suitable for interrupted cut. 
  • Through coolant head and through or along the tools and the multi-purpose adapter. 
  • Ten kits to cover wide boring capacities.
Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version