Best Line Tooling Sdn Bhd
15A, Jalan NB2 1/1,
Taman Nusa Bestari 2,
81300 Skudai,
Johor, Malaysia.
15A, Jalan NB2 1/1,
Taman Nusa Bestari 2,
81300 Skudai,
Johor, Malaysia.
+607-5589849
+6014-9882372 (Ms.Zixuan)
+6014-9882372 (Ms.Zixuan)
+607-5549849
Axialibrabore / Axialibrabore Plus
| Previous | 5 / 8 | Next |
High speed machining, up to 1500 m/min, can be performed using the balanced Axialibrabore™ and Axialibrabore™ Plus.
When reduced machining time, higher boring quality and excellent surface finish are required, these heads produce perfect hole geometries (e.g. better circularity) with a hole diameter precision of +/- 3 µm (e.g. IT 5 from 10 mm diameter) and an excellent surface finish (Ra=0,6).
User friendly
- Balancing with a single ring eliminates the need to refer to balancing charts
- Easy to read Vernier diameter setting
Excellent hole quality
- Diameter adjustment - can be adjusted within 2,5 µm
- Excellent surface finish (Ra = 0,6 possible to achieve)
AxiaLibraBore™: small balanceable head for fine boring Ø 2 - 20 mm (0.078-0.78 inches)
AxiaLibraBore™ Plus: balanced head for fine boring Ø 6 - 33 mm (0.236-0.1.3 inches)